Cast vs Extruded Acrylic Sheet: How to Choose the Right One

Column:Acrylic Sheet Insights Time:2026-11-16 Browsing volume: 41
Both cast and extruded acrylic sheets are made from PMMA. The difference is how the sheet is manufactured, which affects price, tolerances, toughness, colour options and how the sheet can be machined or fabricated. This guide helps you specify the right process on a factory quotation.

Both cast acrylic sheet and extruded acrylic sheet are made from PMMA. The difference is in how the sheet is manufactured. This impacts the price, tolerances, toughness, colour options and how the sheet can be machined or fabricated. Typically, extruded acrylic sheet will be cheaper on similar grades and will have tighter tolerances. Cast acrylic sheet will typically be the better choice if you require a tougher sheet, wider thickness options, more colours, or difficult machining and polishing. The following table and information provide guidance to the correct process to include on your factory quotation.

Differences between the two processes

Cast acrylic sheets are made by pouring liquid methyl methacrylate into a mould (usually two glass sheets) and allowing it to polymerise. This is a batch process and can be done in smaller runs, meaning it is easier to produce bespoke colours, specialist finishes and wide thickness options.

Extruded acrylic sheet is produced from PMMA pellets. The PMMA is melted and pushed through a die. After this it passes through calender rollers where the thickness is set. This is a continuous process and can be done in longer runs, meaning it will generally have a consistent gauge. This usually means it will have fewer colour and thickness options.

As the polymerisation process differs, the behaviour of the sheets will also be different. Cast acrylic sheets will typically have a higher molecular weight and therefore lower stress, leaving them tougher and more forgiving with heavy machining. Extruded acrylic sheets will typically be more orientated from the line, have tighter tolerances, and can often be more easily formed or glued. The two processes are not interchangeable.

Key differences between cast and extruded

The following details provide general guidance on what you can expect from each type. Exact values will depend on your grade, thickness and quotation. This page is a guide to help you with your specification, not a data sheet.

Cast acrylic sheet

Extruded acrylic sheet


Process

Batch process using a mould

Continuous process using a die

Cost

Usually more expensive

Usually cheaper for similar sheet

Tolerances

Often looser. Check tolerances on your quotation

Typically tighter, as thickness is set on the line

Optical quality and stress

Usually high clarity and less stress

Good clarity; can often have more stress with heavy machining

Machining, laser and polish

Often the better option for CNC, drilling and polished edges. Less prone to melting or chipping

Can be machined, routed and polished with the correct settings. Often good for flame polishing

Thermoforming and gluing

Can be thermoformed, with different temperatures and cycles

Often easier to thermoform, line bend and glue

Colours and bespoke options

More colours, finishes and bespoke options available. Smaller runs are more practical

Usually fewer colours available. Best for standard colours in volume

Thickness available

1.8–100 mm on current listings

0.8–12 mm, as stated on the acrylic sheet overview

Typical applications

Thick components, detailed machining, bespoke colours, and chemically or mechanically challenging components

Volume signs, displays, tight-fitting assemblies, thermoforming and thin sheet

Always check the thickness and tolerances of the grade you require. This is a general guide, and we cannot guarantee all colours and sizes will be available.

Choosing between the two

Signage and light boxes

Extruded acrylic sheet is often sufficient for basic indoor signage, menu boards and longer runs. If you require a thick panel, detailed CNC work or polished edges, then cast acrylic sheet may be a better choice. If you require a non-standard colour or finish, then cast acrylic sheet may be required.

If you are looking at illuminated signage, don’t automatically choose cast acrylic sheet over extruded, as you may still see the LED dots. Hotspots are usually down to the optical properties of the sheet, LED spacing and depth of the box. Begin with a diffusing grade such as opal or frosted sheet, and try a sample at the correct distance with your modules. For more information on choosing between cast and extruded acrylic sheets for LED signage, see How to choose cast or extruded acrylic for LED signs.

We would suggest using extruded acrylic sheets for simple volume indoor signage. If you require a thick, highly fabricated panel or bespoke colour, then cast acrylic sheets would be the better option. Always consider your diffusion requirements first.

Retail displays and slotted fixtures

If you require your panels to slot into place or fit tightly, then it is important to consider the tolerances of the sheet. A 3 mm nominal sheet won’t be exactly 3 mm. If you will be slotting multiple times, then extruded acrylic sheets (typically tighter gauges) may be a better choice. If you are engraving, heavily machining or polishing, then cast acrylic sheets may still be the best choice.

Before ordering in volume, measure your sheet and slot. Add the thickness tolerances you can accept to your purchase order. For more information on checking the tolerances of your acrylic sheet for slotted displays, see Acrylic sheet thickness tolerance for slotted displays.

If you require a tight, repeatable joint, then extruded would be the better choice. If you require a high-quality finish after engraving or machining, then consider cast. Always add tolerances.

Furniture and decorative components

Cast acrylic sheets are often the better choice if you will be polishing the edges, or if you require a thick component or a bespoke colour. If you are thermoforming, or require a larger quantity with a standard colour, then extruded can be a better-value choice. It really depends on your drawing. A thick panel for the end of a piece of furniture with polished edges is very different to a decorative cover that is thermoformed.

We would suggest sending us your drawing, finish and quantity.

Industrial components, machining and chemicals

If you will be routing or drilling, require a thicker structural component, or require the sheet to be in contact with solvents or water for longer periods of time, then cast acrylic sheets are typically the better choice to specify, unless the factory has a specific grade of extruded acrylic sheet for this. Cast acrylic sheets have typical toughness, chemical resistance and less stress, meaning fabricators often find less chipping and neater edges with demanding tool paths.

This isn’t to say extruded sheets aren’t suitable for machining, but you must ensure your settings and application are right for the sheet. For more information on why cast acrylic sheets are often stronger, see Why cast acrylic sheets are often stronger. Use this page to help you decide between cast and extruded.

We would suggest going for cast as a default for heavy machining or chemicals. If you require extruded, check with a process trial.

Thermoforming and bending

Extruded sheets are often easier to soften at lower temperatures and can generally be more easily line bent or thermoformed. Cast sheets can also be thermoformed, but will require different temperatures, cycles and moulds. Overall, it can’t be said that cast sheets are always required for thermoforming.

How deep you want to thermoform, thinning of the corners, surface finish, and trying a trial on your tool are all more important. For more information on choosing your acrylic sheet for thermoforming, see How to choose acrylic sheet for thermoforming. A trial run will give you more information than a catalogue.

We would suggest going for extruded first for lots of thermoformed or bent components. If you require a deep draw, a high-quality finish, or tight thickness after stretching, then try both.

RFQ

Don’t just ask for acrylic sheet, 3 mm. If you are purchasing from a factory, then make sure you include enough details to ensure you receive the correct sheet.

Copy and fill out:

  • Application and process: cutting, CNC, laser, polishing, thermoforming, bonding

  • Indoor or outdoor? Any UV or weather requirements?

  • Cast or extruded? Or describe your application and let us recommend

  • Nominal thickness? Tight tolerances?

  • Colour and finish? Any light-transmission or diffusion requirements?

  • Size and quantity?

  • Do you require a sample or process trial?

  • Packaging or protective-film requirements?

For a full checklist, see What to include in an acrylic sheet factory quote.

Apexplast manufacture both cast acrylic sheets and extruded acrylic sheets. If you are unsure which type to choose, then send us your application, process, thickness and quantity. If you have a drawing, then send this too. Contact our team.